Balencing software

Simply drag the splash screen to the monitor you would like to use for balancing, and the software does the rest. The EasyBalance software is touch-screen and tablet compatible. Easy Rotor Setup, point and click, rotor setup in one screen. Setting up a rotor is fast and simple. There is even a selection for a"customer-defined" tolerance standard.

All rotor setup information, including tolerance calculator settings, are stored with the rotor name. Everything is automatically recalled when the rotor name is selected again from the Rotor Name drop-down menu. Run the machine again and measure the 1x RPM vibration level and phase angle once more. Stop the machine and remove the test weight Press button F9 Calculate, read results and mount correcting weights of the calculated masses in the angles F1 and F2 at the same radius as the test trial weights from the test weight place angle by the rotation direction.

RunC-Trim balancing Run the machine again and measure the amount of vibration, to see how successful the balancing job has been. Mount a trial weight of suitable size in plane 2. Start the machine again, click on F9-Run and measure the vibration level and phase angle once more. Step 4 - Calculation The values of the correction weights and angles required will be calculated automatically and shown in popup form. RunC Mount the correction balance weights at the positions indicated in popup form at the same radius as the test trial weights as shown in the figure in right column.

Start up the machine again and measure the amount of residual unbalance in the rotor , to see how successful the balancing job has been. Balancing procedure - video. Field balancing 4. Other features. Common vibration chart. Vibration spectrum charts. Portable field balancer "Balanset-1A" 1.

Introduction Balanset-1A is portable dynamic balancer used to balance rigid rotors in their own bearings in-situ or as measuring system in the balancing machines. It provide single- and two-plane dynamic balancing services for fans, grinding wheels, spindles, crushers, pumps and other rotating machinery. Balancing software provides the correct balancing solution for single-plane and two-plane balancing automatically. Balanset-1A is simple to use for non-vibration experts.

Balancing procedure uses 3-run method with adding the test mass in every place of balancing Influence Coefficient Method. Software calculate balancing weghts and place angle automatically, show it in the result table and save in archive file. Also you can print balancing report.

Waveform and spectrum of vibration charts are possible.