Mitsubishi xd500u st user manual

Page Information Menu Select this setting when you connect the projector to high definition video equipment having R, G, and B output terminals. See page 17 for the menu options. This projector automatically and properly projects video signals being input from the computer.

However, some video signals may not be projected, depending on the type of the computer. In some cases, it may not work. Use of other lamps may cause a failure of the projector. Page Interval Of Lamp Replacement 5. Remove the lamp attachment unit. If it is pulled out quickly, the lamp may break, scattering glass fragments. Page Troubleshooting Troubleshooting Before asking for repair of the projector, check the following.

If the symptom persists, stop using the projector, be sure to unplug the power plug, and then contact your dealer. No image appears on the screen. Problem Power can not be turned on. A very small number of pixels may visibly or invisibly be persistent all the time, but they are not a sign of system malfunctions.

Over Page 29 Cleaning of the projector and the ventilation slots Use a soft cloth to clean the projector and the ventilation grilles. When the grilles become dirty, wipe them with a soft cloth dampened with diluted mild detergent, and then wipe them with a dry cloth. The internal DLP technology touts higher contrast, less visible pixels and more portability. This projector was first available for purchase in June and has been discontinued by Mitsubishi.

The ANSI lumen rating measures the brightest white that a projector can produce by averaging nine light meter measurements taken across the projected image. BUYER BEWARE Either this projector's brightness specification does not cite an industry-accepted unit of measurement, or according to our calculations it seems unlikely that this projector is capable of producing the manufacturer's cited brightness specification.

For details, consult your dealer. See page Page Basic Connections Basic connections This projector can be connected with various devices such as a VCR, video camera, videodisc player, and personal computer that have analog RGB output connectors. You can input video and audio using an HDMI cable only. Attach the provided power cord to the projector. Page 18 Basic operation continued Wall Screen This function is to reproduce natural color tones when images are pro- jected directly onto a screen or wall surface.

Page Menu Options Menu operation continued Menu Options Set the following options provided in the respective menus. AUTO Use this setting for most cases. Several settings can be adjusted using the menu. Page 23 Menu operation continued 2. Page 24 Menu operation continued 3. Automatically sets the aspect ratio in relative to the input signal. Page 25 Menu operation continued 4. Page 26 Menu operation continued 6.

You can make adjustments of the brightness of the projected image See page 22 for the menu options. When unplugging, hold and pull the plug. Do not pull the cord. RGB cable for PC Page Preparation Remove the lens cap. If you leave the lens cap on the lens with the projector turned on, it may be deformed because of heat build-up. If you want to turn on the projector again, wait until the indicator goes out, and then press the POWER button.

Page 15 When connecting to a laptop computer: When this projector is connected to a laptop computer, there may be times when images may not be projected. When it occurs, set the computer so that it can output signals externally. The procedure varies across computers in use. Page Menu Options Adjusts the input level of analog video signals. The input level of the video signal varies across devices to which the projector is connected. A high input level causes projected images to appear solid white, and a low input level causes projected images to appear dark.

Use the remote control to turn on the lamp. Selects a desired timer setting until the projector enters the standby mode when there is no signal input from the source. Page Information Menu Select this setting when you connect the projector to high definition video equipment having R, G, and B output terminals.